Matters needing attention when laying carpet
(1) The ground should be cleaned in advance, leaving no residual debris such as stones and sawdust.
(2) The glue used for the carpet must be laid flat and consistent, and the interface should be firmly glued with adhesive tape. If it is pasted with double-sided tape, it is not only simple and economical, but also very practical and effective. Both sides of the double-sided tape are glued, and the glue layer is directly covered with a plastic film.
(3) Pay attention to some junctions around the carpet and the edge of the wall, etc., should be close to each other, and there should be no obvious phenomena such as separation from the seam and edge warping.
(4) The pattern of the carpet interface should be coherent and the same color and luster, and the seams should be hidden and not exposed.